Instruction Manual
35
Program
This is the port number for connecting
to the SV1108IPEXT/POW from the
Windows Client and Java Applet
Viewers, and from the Windows and
Java AP programs. The default is 9000.
Virtual Media
This is the port number used for data
transfer using the SV1108IPEXT/POW’s
virtual media feature. Valid entries are
from 1–65535. The default is 9003.
SSH Port
The port for SSH access. The default is
22.
NOTE:
1. Valid entries for all of the Service Ports are from 1–65535.
2. The service ports cannot have the same value. You must set a different value for
each one.
3. If there is no firewall (on an Intranet, for example), it doesn’t matter what these
numbers are set to, since they have no effect.
IP Address
The SV1108IPEXT/POW can either have its IP address assigned dynamically at bootup
(DHCP), or it can be given a fixed IP address.
For dynamic IP address assignment, select the
Obtain an IP address automatically
, radio
button. (This is the default setting.)
To specify a fixed IP address, select the
Set IP address manually
, radio button and fill in
the IP address.
NOTE:
1. If you choose Obtain IP address automatically, when the switch startsup it waits to
get its IP address from the DHCP server. If it hasn’t obtained the address after one
minute, it automatically reverts to its factory default IP address (192.168.0.60.)
2. If the SV1108IPEXT/POW is on a network that uses DHCP to assign network
addresses, and you need to ascertain its IP address, see IP Address Determination,
page 152, for information.
