Instruction Manual
91
Option
Usage
NetworkType
Select the type of internet connection
that exists between the Local Client
computer and the SV1108IPEXT/POW,
which will be used to automatically
adjust the Video Quality and Detect
Tolerance settings to optimize the
quality of the video display.
Since network conditions vary, if none
of the pre-set choices seem to work
well, you can select Customize and use
the Video Quality and Detect Tolerance
slider bars to adjust the settings to suit
your conditions.
Video Quality
Drag the slider bar to adjust the overall
Video Quality. The larger the value,
the clearer the picture and the more
video data goes through the network.
Depending on the network bandwidth,
a high value may adversely effect
response time.
Enable Refresh
The SV1108IPEXT/POW can redraw
the screen every 1 to 99 seconds,
eliminating unwanted artifacts from
the screen. Select Enable Refresh and
enter a number from 1 through 99.
The SV1108IPEXT/POW will redraw the
screen at the interval you specify. This
feature is disabled by default. Click to
put a check mark in the box next to
Enable Refresh to enable this feature.
NOTE:
1. The switch starts counting the time
interval when mouse movement stops.
2. Enabling this feature increases the
volume of video data transmitted over
the network. The lower the number
specified, the more often the video data
is transmitted. Setting too low a value
may adversely affect overall
operating responsiveness.
