Instruction Manual
114
User Macros
User Macros are used to perform specific actions on the remote server. To create the
macro, do the following:
1. Select the
User Macros
radio button, then click
Add
.
User Macro operation is the same under the JavaClient as it is under the WinClient.
System Macros
System Macros are used to create exit macros for when you close a session. For
example, as an added measure of security, you could create a macro that sends the
Winkey-L combination which would cause the remote device’s log in page to come up
the next time the device was accessed. To create the macro, do the following:
1. Select
System Macros
, then click
Add
.
System Macro operation is the same under the JavaClient as it is under the WinClient.
