StarGuide Digital Networks StarGuide III, Руководство пользователя

Страница: 34 / 58

24 StarGuide Digital Networks
CMD DESCRIPTION ACTION BRIEF
EB Signal Strength Queries the current Eb/No signal strength
estimation.
FBC Fall Back Carrier Sets up a backup carrier in cases where the
carrier is lost for a number of seconds
specified by the timeout.
FC Fade Counter Increments every time the demodulator
enters a fade acquisition.
LCD Set the LCD Helpful in determining if a remote receiver
is receiving In Band Signaling commands.
LOG Event LOG Keeps track of the last 256 system events by
time stamping the event and putting it into
non-volatile memory.
LPB Load Parameter Block Takes critical receiver settings stored in
flash memory and overwrites the current
settings in non-volatile memory.
MC Monitor and Control Port Settings Queries the current communications
settings of the M&C port.
MUX Changing Multiplexes Starts acquisition for another mux; used in
conjunction with the CM command.
PID Physical ID Queries the receiver’s current physical ID.
PORT Port Settings Query Provides quick indication of the desired
port’s (ports A thru F) settings.
REV Software Revisions Provides current versions of software
running the receiver.
RF L-Band Frequency Provides the receiver’s current RF setting in
kilohertz. Initiates acquisition.
RFM Relay Fault Mask Indicates all of the current faults that will
activate the fault relay.
RLY Port Relay Status Queries the current state of the relays on a
specified port (ports A thru F).
ROUT Set Status Relay Output Activates a relay on an audio card when the
audio decoder loses lock for a continuous
specified number of seconds.
RS Receiver Status Used to gather statistics (demodulator
performance) on the demultiplexer and the
Reed Solomon.
RST Reset Receiver
Resets the receiver.
SCM Set Carrier Manually Sets the receiver frequency (kilohertz) and
data rate (bits per second). Initiates
acquisition.
SF Display System Faults Displays all of the faults that have occurred
since the last time the fault value was
cleared.
SP Set Port Sets or queries port specific parameters.