Star Micronics MG-S Series Скачать руководство пользователя страница 97

Страница: 97 / 114

MG-S series operation manual 9

Troubleshooting

－

Error Message/

Error Code

Cause

Coping method

ERR752

The unit weight of the samples is 0g and under at
Counting mode.

Choose the samples of which unit
weight is larger than the minimum
interval of the balance.
Counting mode cannot operate
subtractive counting.

ERR753

Time-out error of importing the unit weight at
Counting mode.

-
-

Improper setting of the weighing pan or
pan base is suspected.
Check for contact with other object.
Check for any wind or vibration.

ERR754

Deleted the latest data then executed deleting
operation of the second latest data at statistics
mode.

- Only the latest data can be deleted.
- Select <ALL> to delete all the other

data.

ERR755

Time-out error of importing the sample weight at
Statistics/Formulation mode.

- Improper setting of the weighing pan or

pan base is suspected.

- Check for contact with other object.
- Check for any wind or vibration.

ERR756

Weight of the sample is out of the importing range
at Statistics/Formulation mode (0g to maximum
capacity).

Choose the sample of which weight is
within the importing range.

ERR757

Bluetooth connection error.

Disconnect and then reconnect the
Bluetooth communication.

ERR758

Bluetooth hardware error.

Contact the store where you purchased
the product.

ERR763

The calculation error of the specific gravity of the
sample at specific gravity mode.

Re-execute the specific gravity function.

ERR764

External weight used for <631 EX CAL> is
different from the selected weight range at
<SELECT WEIGHT>.

Use the external weight of which weight
is within the selected range.

Содержание MG-S Series



















































































































Результаты поиска

Содержание MG-S Series

Отзывы:

Star Micronics MG-S Series, Руководство по эксплуатации, Страница: 97 / 114

Результаты поиска

Содержание MG-S Series

Отзывы: