Star Micronics MG-S Series Скачать руководство пользователя страница 24 | Manualshive

Страница: 24 / 114

Star Micronics MG-S Series Скачать руководство пользователя страница 24

2

Basic usage MG-S series operation manual

－

14

－

2

Basic usage

2-1

Turning on/off the power, and checking for the operation

1

Turn on the power for the balance.

“Self-check”

Connect the included AC adapter to the
balance.
When the AC adapter is plugged in, the
balance enters the standby state and an
asterisk < > appears.

Push [On/Off] key.

All displays on the LCD lights, followed by
the self-check of the balance. During the
self-check, the LCD display automatically
changes.
Completion of the self-check is followed by
the weight mode.

Do not push any key during the self-check.

2

Balance operation check.

Press the weighing pan lightly to check if
the indication changes.

3

Turn off the power for the balance.

Push and hold [On/Off] key (About 2
seconds)

(1)  Pushing and holding [On/Off] key obtains the standby status from any operation status.
(2)  When battery driven, the balance on/shutdowns without standby status.
(3)  The balance starts up in the last measuring mode before it was switched off.

Verified balance always starts up in weighing mode.

«
...
22
23
24
25
26
...
»

Содержание MG-S Series



















































































































Отзывы:

Нет отзывов