Star Micronics MG-S Series, Руководство по эксплуатации, Страница: 96 / 114

9 Troubleshooting MG-S series operation manual
－
86
－
Error Message/
Error Code
Cause Coping method
ERR723 Out of Zero adjustment range (1.5% of the
maximum capacity) Make sure nothing on the weighing pan
while executing zero adjustment.
ERR724 Out of Tare subtraction range (0g to the maximum
capacity) Chose the tare of which weight is within
the tare subtraction range.
ERR734 Weight of the sample is out of the importing range
at actual value setting method at Percent
weighing mode (lower limit to maximum capacity). Load the sample of which weight is
within the importing range.
ERR735 Time-out error of importing the sample weight in
the actual value setting method at Percent
weighing mode. -
-
Improper setting of the weighing pan or
pan base is suspected.
Check for contact with other object.
- Check for any wind or vibration.
ERR736 The setting value is out of the setting range at
numeric value setting method at Percent weighing
mode (lower limit to maximum capacity). Set the value within the range.
ERR737 - Sample weight in the air is out of the importing
range at specific gravity mode (over 0g to
maximum capacity).
- Divide the sample so as to its weight in
the air is within the importing range.
- Sample weight in the water/liquid is out of the
importing range at specific gravity mode (“0 –
maximum capacity” to “maximum capacity”).
- Divide the sample so as to its weight in
the air is within the importing range.
ERR738 Time-out error of importing the sample weight in
the water/liquid at specific gravity mode. -
-
Improper setting of the weighing pan or
pan base is suspected.
Check for contact with other object.
- Check for any wind or vibration.
ERR739 Time-out error of importing the sample weight in
the actual value setting method at Preset tare
setting. - Improper setting of the weighing pan or
pan base is suspected.
- Check for contact with other object.
- Check for any wind or vibration.
ERR740 The setting value is out of the setting range at
numeric value setting method or actual value
setting method at Preset tare setting (0g to
maximum capacity). Set the tare of which weight is within the
tare subtraction range.
ERR746 Invalid date or time was input at <647 DATE
SETTING> or <648 TIME SETTING>. Set the date and time correctly.
ERR747 Time-out error of importing the sample weight in
the actual value setting method at Comparator
function. -
-
Improper setting of the weighing pan or
pan base is suspected.
Check for contact with other object.
- Check for any wind or vibration.
ERR748 The setting value is out of the setting range at
numeric value setting method or actual value
setting method at Comparator mode (“0 –
maximum capacity” to “maximum capacity”). Set the value within the range.
ERR749 Time-out error of importing the sample weight in
the actual value setting method at Adding
function. - Improper setting of the weighing pan or
pan base is suspected.
- Check for contact with other object.
- Check for any wind or vibration.
ERR750 - Weight of the sample to add is out of the
importing range (“0 – maximum capacity” to
“maximum capacity”).
- Choose the sample of which weight is
within the importing range.
- The total value has exceeded the maximum
display digit.
- Clear the total value.
ERR751 The unit weight of the samples is lighter than the
minimum piece weight (MPW) of the balance at
Counting mode. Choose the samples of which unit
weight is larger than the Minimum Piece
Weight (MPW) of the balance.