Star Micronics MG-S Series, Руководство по эксплуатации, Страница: 90 / 114

8 Controlling and adjustment functions MG-S series operation manual
－
80
－
8-5 Balance control setting
8-5-1 Balance ID setting
A balance ID (Scale ID) can be set to discriminate the balance. The balance ID is output with GLP
header output and external span calibration/test result output. Balance ID is checked by free key
<<ID>>.
1
Select the balance ID setting.
Push [Menu] key, then push [F1-F4] keys to
go to <641 SCALE ID>.
Push [F4] key.
2
Input the balance ID.
Repeat the input
The digit for inputting is blinking.
Push [F1/F2] key to increment/decrement
the digit to select.
Push [F3] key to input the next digit.
Push [F1/F2] key.
Repeat the input by the procedure above.
Push [F4] key to fix the balance ID and shift
to <641 SCALE ID>.
3
Exit the setting menu.
Push [Menu] key to shift to the measuring
mode.
8-5-2 Password control
Enable/disable the password protection.
(1) Refer to “8-5-2(1) Administrator password registration” and “8-5-2(2) User password registration”
for password registration/changing.
(2) Refer to “Appendix 6 Balance operation with password control function” for using the balance
with password control.
1
Enable/disable the password protection.
Push [Menu] key, then push [F1-F4] keys
to go to <642 PASSWORD>.
Push [F4] key to change.
Push [F1/F2] keys to select;
OFF
：
Disable
ON
：
Enable
Push [F4] key to fix.
2
Exit the setting menu.
Push [Menu] key to shift to the measuring
mode.
Password input display appears from next
power on.