Star Micronics MG-S Series Скачать руководство пользователя страница 5

Страница: 5 / 114

－

iii

－

How to use this document

■

Symbols used in this document

Understand the meaning of the following symbols and observe the instructions of this document.

Symbols

Meaning

Used for the situation that invites an imminent risk of death or severe injury if
proper precautions are not taken.

Used for the situation that invites a risk of death or serious injury if proper
precautions are not taken.

Used for caution concerning operations that may lead to a light physical
injury to persons or damage of the products/facilities if proper precautions
are not taken.

Used for notation for avoiding from delection, overwrite the weighing data or
for accurate weighing and appropriate usage of the equipment.

Used for reference information on operation

Used for “Prohibition” items

Used for “Mandatory” items requiring positive action

Used for prohibition items to avoid “Electrical shock”.

This symbol indicates the operation/specification related to NTEP approval
and verification.

This product/
The product/
The balance

Refers to the product.

[On/Off] key

The name of an operation key located in front of the main unit is
represented in square brackets “[ ]”.

A message on the display is represented in angle brackets “< >”.

<<F1>>

“Free key” or “Shortcut” is represented in double angle brackets “<< >>”.

Push the key

Signifies pushing lightly an operation key once.

Push the key long

Signifies keeping pushing an operation key until the designated indication
appears.

Содержание MG-S Series



















































































































Результаты поиска

Содержание MG-S Series

Отзывы:

Star Micronics MG-S Series, Руководство по эксплуатации, Страница: 5 / 114

Результаты поиска

Содержание MG-S Series

Отзывы: