Star Micronics MG-S Series Скачать руководство пользователя страница 53

Страница: 53 / 114

MG-S series operation manual 3

Functions related to the operation

－

3-11-1

Weighing by means of the plus side addition

When <<ADD>> is assigned to [F1] key and <<TOTL>> is assigned to [F2] key.

Place a first sample to be weighed.

Place a first sample to be weighed.

After < > appears, push
[F1](<<ADD>>) key.

The weighed value is stored and <SUM
TOTAL> is indicated for a few seconds.

In the case of the addition accumulating

Replace a sample to be weighed with a new
one.

Remove the previous sample to be
weighed to return the indication to zero
and then place the next sample to be
weighed.

After < > appears, push
[F1](<<ADD>>) key.

The weighed value is stored and <SUM
TOTAL> is indicated for a few seconds.
Repeat this operation to perform addition.

In the case of the net addition

Add a sample to be weighed.

The indication automatically returns to
zero. Then add the next sample to be
weighed.

After < > appears, push
[F1](<<ADD>>) key.

After indicating <SUM TOTAL> and the
accumulated value for a few seconds, the
balance returns to the weight indication,
followed by the automatic tare.
Repeat this operation to perform addition.

Indicate the total value.

Push [F2](<<TOTL>>) key.

Total value is indicated.

Delete the total value.

Push [F3](<DEL>) key.

The total value is deleted.

Содержание MG-S Series



















































































































Результаты поиска

Содержание MG-S Series

Отзывы:

Star Micronics MG-S Series, Руководство по эксплуатации, Страница: 53 / 114

Результаты поиска

Содержание MG-S Series

Отзывы: