Star Micronics MG-S Series Скачать руководство пользователя страница 64

Страница: 64 / 114

User information setting MG-S series operation manual

－

5-3

Setting of the discrimination value of the comparator function

There are two ways of inputting a reference value and upper and lower limit values as described below:

- Actual value setting method:

Weighing a sample with a balance and then making it a setting value.

- Numeric value setting method:

Inputting a setting value directly via key operation.

The discrimination is performed according to the following criteria:

- Absolute value: The discrimination is performed based on the upper and lower limit values that have

been set in advance.

- Relative value: A reference numeric value is set in advance, and the discrimination is performed

based on the range defined by the upper and lower limit values that have been set

for the reference numeric value.

（

For example

）

Two-point (upper and lower limits) setting, Reference value = 1000.0g,

Lower limit value = 900.0 g, Upper limit value = 1200.0 g

Discrimination

method

Reference value

Lower limit value

Upper limit value

1000.0 g

900.0 g

1200.0 g

Absolute value

900.0 g

1200.0 g

Relative value

1000.0 g

-100.0 g

200.0 g

Select the “Actual value setting method” or “Numeric value setting
method”.

(1) Reference value, Lower limit value and Upper limit value can be set also via Setting menu below.

Comparator setting for Weighing mode: 33 COMPARE WEIGHT

Comparator setting for Percentage mode: 34 COMPARE PERCENT

Comparator setting for Counting mode: 35 COMPARE COUNT

Comparator setting for Multiplied by Coefficient mode: 36 COMPARE MULT

(2) Comparator function is available in Weighing mode, Percentage mode, Counting mode and

Multiplied by Coefficient mode.

Содержание MG-S Series



















































































































Результаты поиска

Содержание MG-S Series

Отзывы:

Star Micronics MG-S Series, Руководство по эксплуатации, Страница: 64 / 114

Результаты поиска

Содержание MG-S Series

Отзывы: