Standard Horizon HX851E, Руководство пользователя

Страница: 51 / 92

Page 51 HX851E
7.8.2 SETTING UP THE POSITION REQUEST RINGER
The HX851E has the capability to turn off the Position Request ringer.
1. Press and hold the [ CALL
(
ENT
)
MENU
] key un-
til “
Setup Menu
” appears.
2. Press the [
] key to select “
DSC Setup
” menu.
3. Press the [ CALL
(
ENT
)
MENU
] key, then select
“
DSC Beep
” with the [
] / [ ] key.
4. Press the [ CALL
(
ENT
)
MENU
] key.
5. Press the [
] / [ ] key to select “
Position Re-
quest
”, then press the [ CALL
(
ENT
)
MENU
] key.
6. Press the [
] key to select “
Off
”.
7. Press the [ CLR
] key twice to return to the “
Setup
Menu
”, then press the [ CLR
] key again to return
to radio operation.
To enable the ringer tone, repeat the above procedure,
press the [
] key to select “
On
” in step “6” above.
7.8.3 TRANSMITTING A POSITION REQUEST TO ANOTHER VESSEL
Pre-Programmable Request
1. Press the [ CALL
(
ENT
)
MENU
] key. The “
DSC Call
Menu
” will appear in the display.
2. Press the [
] / [ ] key to select the “
Pos Re-
quest
”.
3. Press [ CALL
(
ENT
)
MENU
] key to show the “
Position
Request Call
” directory. This directory uses the
“
Individual Call
” directory information.
4. Press the [
] / [ ] key to select a name, then
press the [ CALL
(
ENT
)
MENU
] key.
5. Press the [ CALL
(
ENT
)
MENU
] key again to
transmit the Position Request DSC call.
6. When the HX851E receives the position from
the polled vessel, a ringing alarm will sound, and
the display shows the position of the vessel and
also transferred to a GPS Chart plotter if con-
nected.
7. Press any key to stop the alarm.
8. If you wish to display the position of the polled vessel
on the “WAYPOINT” screen, go to next step, other-
wise press the [
CLR
] key to return to radio operation.
9. Press the [ CALL
(
ENT
)
MENU
] key to enter the “
Waypoint Input
” menu.