Standard Horizon HX851E, Руководство пользователя

Страница: 42 / 92

HX851E Page 42
the right, press the [ CALL
(
ENT
)
MENU
] key. Repeat
this procedure until all nine spaces of the MMSI num-
ber which you want to contact are entered.
6. If a mistake was made entering in the MMSI number
repeatedly press the [ H/L
( )] key until the wrong num-
ber is selected, then press the [
] / [ ] key to correct
the entry.
7. When finished entering the MMSI number, press and
hold the [ CALL
(
ENT
)
MENU
] key. The transceiver will
beep, and the “
Select Intership CH
” menu will appear
8. Press the [
] / [ ] key to select “
Manual
”, then press
the [ CALL
(
ENT
)
MENU
] key.
9. Press the [
] / [ ] key to select the operating channel
you want to communicate on and press the
[
CALL
(
ENT
)
MENU
] key.
10. Press the [ CALL
(
ENT
)
MENU
] key again to
transmit the Individual DSC signal.
11. When an Individual Call acknowledgment is re-
ceived, the established channel is automatically
changed to the channel which is selected on step
5 above and a ringing tone sounds.
12. Press the [ CLR
] key to listen to the channel to
make sure it is not busy, then key the micro-
phone and call the other vessel you desire to commu-
nicate with.
7.5.5 RECEIVING AN INDIVIDUAL CALL
When receiving an Individual Call, an acknowledgment transmission is sent
back to the calling station to switch to a communication channel. The
HX851E
default setting is Automatic, but has a manual menu selection that allows you
to see the vessel calling before sending an reply. This selection is useful if you
want to see who is calling and requesting you to switch to a channel for com-
munications, similar to caller id on a cellular phone.
1. When an Individual Call is received, an Individual Call ringing alarm sounds.
The radio automatically (automatic mode selected)
switches to the requested channel. The display shows
the MMSI of the vessel calling.
2. Press any key to stop the alarm.
3. Press the
PTT switch and talk to the calling ship.