HX851E
Page 20
[
SCAN
(
DW
)] Key
Press this key to start scanning of programmed channels.
Secondary use:
Press and hold this key to watch for a transmission on CH16, another
selected channel, and CH70 until either signal is received (Triple Watch).
[
CALL
(
ENT
)
MENU
] KEY
Press this key to access the DSC Call Menu. The “Individual Call”,
“Group Call”, “All Ships Call”, “Position Request”, “Position Report”,
“DSC Log”, and “DSC Test” functions can be accessed from the DSC
Call Menu.
Secondary use:
Press and hold this key to access the “Radio Setup”, “DSC Setup” or
“GPS Setup” menu.
[
16/9
] Key
Pressing this key immediately recalls channel 16 from any channel
location. Holding down this key recalls channel 9. Pressing this key
again reverts to the previous selected working channel.
Channel 9 is used in some part of the world as an alternative calling
channel to Channel 16
[
CLR
] Key
Press this key to cancel a menu selection and/or keypad entry.
Secondary use
(UK version only)
:
When the [
16/9
] key is held and the [
CLR
] key is pressed, the radio will
change the marine band between the USA, International, and Cana-
dian channels.
[
PRESET
] Key
Press this key to recall the “Preset” channel.
Secondary use:
Press and hold this key to memorize the current channel to the “Preset”
memory channel. When pressed a “
” icon will be shown on the
LCD display indicating the channel has been saved to preset memory.
To delete the channel from preset memory, select the channel and press
and hold this key until “
” is removed from the display.
[
POWER
(
)] KEY
Press and hold this key for two seconds to turn the radio on or off.
