Standard Horizon CPV350, Руководство пользователя

Страница: 87 / 144

Page 87 CPV350
knob to the desired selection and press [ENT] or move the ShuttlePoint knob to the right.
5. Press [CLR] until the menu disappears or an easier method is to move the ShuttlePoint
knob to the left a few times.
Figure 18.11.0 - SCAN menu
18.11.1 Memory Scanning (M-SCAN)
By default the CPV350 is set to P-Scan. To change to MEM scan follow steps in “18.11.0
Selecting the Scan Type.”
1. Adjust [SQL] until background noise disappears.
2. Select a desired channel to be scanned by rotating the channel knob. Press and hold
[SCAN/MEM] for one second, “ MEM ” will appears in the “VHF
Radio” window on the display which indicates the channel has been
programmed into the CPV350’s memory.
3. Repeat step 2 for all the desired channels to be scanned.
4. To DELETE a channel from the CPV350’s memory, select the channel then press and
hold [SCAN/MEM] for one second, “MEM” will disappear in the display.
5. To start scanning, just press [SCAN/MEM] momentarily. “ M-SCAN ” appears in the
“VHF Radio” window on the display. Scanning will proceed from the
lowest to the highest programmed channel number and will stop on
a channel when a transmission is received.
6. The channel number will blink during reception.
7. To stop scanning, press
[16/9] or [WX] .
18.11.2 Priority Scanning (P-SCAN)
In the default setting, Channel 16 is set as the priority channel. You may change the priority
channel to the desired channel from the Channel 16 by the Radio Setup Mode, refer to the
next section “18.11.3 Priority Channel Set.”
1. Adjust [SQL] until background noise disappears.
2. Select a desired channel to be scanned by rotating the channel knob. Press and hold
[SCAN/MEM] for one second, “ MEM ” will appears in the “VHF
Radio” window on the display which indicates the channel has been
programmed into the CPV350’s memory.
3. Repeat step 2 for all the desired channels to be scanned.
4. To DELETE a channel from the CPV350’s memory, select the channel then press and
hold [SCAN/MEM] until “ MEM ” is removed from the display.