manualshive.com logo in svg

Standard Horizon CPV350, Руководство пользователя

Поделиться
Скачать
Standard Horizon CPV350 Скачать руководство пользователя страница 50

Page 50

CPV350

9.

MAN OVER BOARD (MOB) FUNCTION

During navigation, the “MOB” feature provides a one-touch method of storing a location
(such as a point were a crew member fell overboard). In this mode, the GPS chartplotter
places a MOB point on the Chart page and all the navigation data shown is related to
navigating back to this point, allowing you to retrace your path to the MOB point efficiently.
1. On the Chart page, press

 [MARK/MOB]

 to start navigating back to the point.

2. You will notice a MOB Mark will be laid on the Chart page and all navigation is referring

back to this point.

3. If the cursor is moved over the MOB Icon, popup windows over Soft Keys will be shown

allowing quick access to the Navigation or Highway pages.

9.0

DELETING A MOB POINT

1. Move the ShuttlePoint knob until the cursor is over the top of the MOB icon.
2. Press 

[D

ELETE

]

, a popup window will be shown to confirm deleting the MOB point.

3. Move the ShuttlePoint knob to highlight 

YES

 and press

 [ENTER]

.

Содержание CPV350

















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды