Standard Horizon CPV350, Руководство пользователя

Страница: 41 / 144

Page 41 CPV350
modes and the depth areas are filled with the white color so different depth areas not
easily distinguishable.
SHIP ICON Allows selection of one of 5 choices of ship icons that represent you vessels position
shown on the chart page.
CURSOR SPEED Selects the preferred speed among Low, Medium and High for the cursor in the Chart page
and within the menu.
MEASURE DISTANCE When this function is turned on allows a distance to be measured between two points
using the ShuttlePoint knob and
[ENTER] key
WINDOWS SETUP This menu selection allows the data windows to be customized on the Chart and
Navigation pages.
LANGUAGE Allows changing the language for menus and data screens.
AUTO INFO By default when the cursor is moved over a buoy, Mark or other item a popup window will
show information of the item. This menu item allows the window to be turned on or off.
CURSOR WINDOW By default when the cursor is moved a window is shown with the Lat/Lon Distance and
bearing from the vessels location to the cursor. This selection allows the window to be
turned off.
CURSOR POSITION The position of the cursor (vessels location) can be customized so it centered in the middle
or centered on the bottom of the chart page. The default is “Bottom”.
COG TIME LINE Is a line projected from the vessel icon which indicates the distance your vessel will travel
at the current speed. Selections are 2, 10, 30 minutes, 1, 2 hours and infinite.
6.8 INFORMATION PAGE
From Setup Menu page it is possible to select an Information page containing Software,
Chart and Optional devices information.
XXXXXX Version YY.YY
M-NA-M632.00 LOS ANGELES and SAN PEDRO BAYS
Software System Information
1
2
Cartography Information
3
Storage Capacity
3
2
1
Figure 6.8 - Information page
1. Press [MENU] two times. Move the ShuttlePoint knob to highlight About... and press
[ENT] or move the ShuttlePoint knob to the right.
2. The Information page appears on the screen (see the previous Figure).
3. Press
[CLR] or move the ShuttlePoint knob to the left to exit and show the Chart page.