Page 118
CPV350
21.3
DSC/RADIO SETUP MODE
The RAM+ can access the DSC / RADIO setup menu (refer to section “19. DIGITAL
SELECTIVE CALLING” and section “20. RADIO SETUP MODE” for details). The LAMP,
CONTRAST, and KEY BEEP menu item accessed from the RAM+ only controls the RAM+’s
display and speaker.
DSC/RADIO Setup mode from the RAM+:
1. Press and hold down the [CALL/SET] key until “RADIO SETUP” menu appears.
2. Press the
[UP(
)]
/
[DOWN(
)]
key to select “RADIO SETUP” or “DSC SETUP” menu.
3. Press the
[CALL/SET]
key, then select the menu item you wish to work on by pressing
the
[UP(
)]
/
[DOWN(
)]
key.
4. Press the
[CALL/SET]
key.
5. Press the
[UP(
)]
/
[DOWN(
)]
key to change the value or condition for the menu item,
then press the
[CALL/SET]
key to save the new setting.
6. Press the
[UP(
)]
/
[DOWN(
)]
key to select “EXIT,” then press the
[CALL/SET]
key
to return to the normal operation.
RADIO SETUP-menu
DSC SETUP-menu
NOTE
When setup menu is selected, the CPV350 will be temporarily disabled until the RAM+ mic, exits
from the setup mode.
Содержание CPV350
Страница 1: ...CPV350 GPS Chart Plotter with VHF FM Marine Transceiver OWNER S MANUAL ...
Страница 139: ...Page 139 CPV350 NOTE ...