© 2022 Staheli West
37
DewPoint Machine Preparation
Install Optional/Custom Equipment
●
Install custom wire harnesses.
□ Gazeeka, accumulator, preservative applicator, etc.
●
Install custom hydraulic lines.
●
Install any other custom equipment.
Install Cameras on DewPoint Machine
●
With rear door opened:
□ ATTACH 2 magnetic base cameras just below the hole to the inside each tail/work
light assembly on each side of the DewPoint machine.
□
CONNECT camera cable to each camera and route secure each cable through
the grommets mounted in each fender and in the inner fender walls as needed.
□ FOLLOW the routing of the wire harnesses that run to the tail/work light assemblies, so the end of
each cable is inside the pump enclosure area inside the rear door of the machine.
□ CONNECT the end of each camera cable to the camera extension cables which are just inside and
below the rear door.
□ Use cable zip ties to secure all camera cables to the wire harnesses that run to the tail/work light
assemblies.
Pickup
Pickup
Bale Chute
PSI Gauge / Knotters
OR
