Initial Set-up
5-5
631 Digital Servo Drive 07-01-08-02-E-V0500
Tuning the Current Loop
IMPORTANT:
Only undertake tuning the current loop after consulting with Eurotherm engineers.
U2
U2
U2
U2
Stable parameters are calculated based on the system data and can be called up using the F5 key.
Manual tuning may be necessary.
Rated values can be sourced either digitally by the internal generator or analog by using ±10V at X10.1 and
X10.2.
The addition of both sources will be active
Go back to Step 4
