SS-16 VoIP-2-GSM USER MANUAL
DOC. NO: SS-16-14 (REV. 02)
Page 56 of 84
6.5.4
Incoming calls
Settings for the incoming calls, that means calls which come in through the mobile
interfaces of the equipment:
Here there are only two rows that can be edited - it cannot be deleted or more rows
added to it. Each row sets the rules for one GSM module – interfaces Mobile 1 and
respectively Mobile 2:
Define the rules for calls coming in from the mobile networks.
For each of the two Mobile interfaces one can choose Enable or Disable and select
the Target (destination) and Action to be taken. First click Edit to start editing the
specific row, then Exit and save the settings:
Target
– the number of the local extension where the calls will be routed which are
coming in through the respective Mobile interface (1000, etc in the examples used).
DISA
– select
No
(default) or
Yes
from the drop list.
If choosing YES, the value in the field Target doesn’t matter any longer, the caller will
receive a DISA tone allowing him to dial the number of the local extension he wants to
reach. See below the routing of such a call, coming in through interface Mobile1 and
being connected to destination by means of DISA dialling:
Ignore
You may set SS16 to ignore the incoming Caller Identity. From the drop
list, select the number of digits to be ignored, from “00” (no digits are
ignored) up to “15” .
