SS-16 VoIP-2-GSM USER MANUAL
DOC. NO: SS-16-14 (REV. 02)
Page 35 of 84
First, select the Mobile interface whose state will be shown – select 1 or 2 , then press
“Load” to see the current state (below for Mobile 1):
Likewise, should “Mobile2” be selected, the SS Telecoms device will show the state of
the other GSM module, in this example registered to a different carrier:
PIN
– state of the PIN code.
Ready
is the normal state, which means the SIM is
active (unlocked) and the equipment may be used. It happens when the PIN is not
requested, or that it is asked for, the correct value has been entered, so the Sim can
operate. If it shows WRONG, it means the respective SIM is blocked because of a
missing or incorrect PIN code. Go to the Mobile settings configuration page and input
the correct PIN to unlock the subscriber card.
Network
– when the respective Sim is properly registered, this field shows the name
of the mobile network where the equipment is registered, as transmitted by the mobile
carrier and understood by the mobile. If the Sim is missing or not properly registered,
this field may display “Limited service”
Sim card ID –
it shows the serial of the Sim card.
