SS-16 VoIP-2-GSM USER MANUAL
DOC. NO: SS-16-14 (REV. 02)
Page 14 of 84
Warning!
Use only the power supply adapter shipped in the equipment package. Using other kinds of power
supplies may cause damage to the equipment.
To avoid accidents or damage to the equipment, follow the steps described earlier. First, connect
the antennas, and then the power supply adapter.
Avoid connecting or removing the antennas while the SS-16 VOIP-2-GSM device is powered.
5.5
CONFIGURING AND INSTALLING THE SIM CARDS
The SS-16 VOIP-2-GSM device may feature a single slot or two slots (in dual SIM version) for SIM
cards. In order for the SS-16 VOIP-2-GSM gateway to work, it must have at least one valid SIM card
with subscription to the GSM or 3G voice carrier where connection is needed.
Configuring the SIM card(s)
The SIM card(s) that is used must be active.
-
The SIM card(s) must be configured
before
it is inserted into the slot of the SS-16 VOIP-2-GSM
.
-
An ordinary GSM cell phone may be used to configure the SIM card
The required configurations are:
PIN CODE REQUEST
– if disabling (from the menu of the mobile phone) the
PIN
CODE REQUEST
security option, one will not be asked to enter it. Alternatively,
the PIN code can be enabled and one may enter it form the Web page used for
configuration.
In this case, take care to enter the correct PIN code
before
inserting
the SIM card, to avoid PUK locking!
Disable GSM services
– GSM operator offers different supplementary services for
calls. When using the SS-16 VOIP-2-GSM interface it is recommended that these
options be disabled because they are only available with additional costs.
Inserting the SIM cards
The one or two SIM cards to be used must be
inserted into the special tray slots of the SS
TELECOMS SS-16 VOIP-2-GSM device.
The slots for SIM cards are located on
the side.
For inserting or extracting the SIM card
use the mobile holder (removable tray)
for the respective SIM card.
Use the little yellow button to actuate the
holder
Handle with care when inserting or extracting SIM card
.
