Spirax Sarco CSM-C, Инструкция по установке и обслуживанию

Страница: 16 / 56

3.696.5275.210
12
Listed on the following pages are specific warnings pertaining to Spirax Sarco Steam
Generators. In addition, throughout this manual, warnings are restated when procedures
are described pertaining to areas of potential danger. All warnings should be carefully read
and understood. All precautions contained in the warnings should be carefully followed to
reduce the chance of injury.
∆
Areas of potential danger:
1. all steam water lines, joints, valves;
2. all power connections and cables;
3. all pneumatic (instrument air) lines and joints.
∆
Before attempting any installation, operation, or maintenance
procedures pertaining to the unit:
1. Ensure that the primary supply (steam) has been turned off at the manual shut off
valve;
2. If the unit has been in operation, allow the clean steam and water in the tank, as well
as all components and surfaces (outlet steam lines, energy source inlet lines, etc.) to
cool;
3. Ensure that all power has been shut off / disconnected;
4. Ensure that all incoming and outgoing steam, condensate, and energy source lines
have been isolated at the manual shutoff valves;
5. Ensure that the pneumatic (instrument air) source has been isolated and the pressure
bled from the lines.
∆
Operating conditions can be very dangerous due to the fact that the steam is
under pressure and at very high temperatures.
To avoid possible injury or death, follow all accepted and recommended procedures
when performing installation, operation, and maintenance procedures.
∆
The combination of electricity and water can pose a very dangerous situation.
Assure that all power has been shut off / disconnected before attempting any
installation or maintenance procedures.