SpinetiX HMP series, Техническая документация инструкция

Страница: 35 / 42

<pull-mode-file>
<ics-file><![CDATA[BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//Spinetix.com/NONSGML Spinetix Control Center//EN
BEGIN:VEVENT
UID:14d64d53-a926-4a71-848d-c78452b195fe
DTSTART:20110411T080000
DTEND:20110411T090000
URL:http://demo.spinetix.com/pullmode/SpinetiX_Hotel.xml
SUMMARY:publish
RRULE:FREQ=DAILY;WKST=SU
END:VEVENT
END:VCALENDAR]]>
</ics-file>
</pull-mode-file>
Configure Pull Mode settings using an ICS file located on a remote server. The ICS file will be checked
and downloaded from the server at regular interval as specified in the command.
The following parameters must be used:

<schedule-uri>
URI of the ICS file used to control the Pull Mode.

<check-frequency>
Frequency at which the ICS file must be checked by the player. The time can be
expressed in seconds (30s), minutes (10m) or hours (3h).
Note: this parameter will override settings done using
<pull-mode-disabled>, <pull-mode-
static>, <pull-mode-file>
or
<pull-mode-remote>
.
For instance, to configure Pull Mode to use an ICS file from the SpinetiX web site, which should be
checked for modifications every 6 hours, use:
<pull-mode-remote>
<schedule-uri>http://demo.spinetix.com/pull.ics</schedule-uri>
<check-frequency>6h</check-frequency>
</pull-mode-remote>
This section describes commands related to Fusion.
Enable of disable Fusion on the device. When enabling Fusion, Pull Mode and content settings will be
reset to their default values.