SpinetiX HMP series Скачать руководство пользователя

Страница: 32 / 42

This section describes how to configure the Pull Mode settings of the device.

Disable Pull Mode. This is the default setting.

Note: this parameter will override settings done using

<pull-mode-static>, <pull-mode-file>

<pull-mode-remote>

For instance, to disable Pull Mode settings previously configured, use:

<pull-mode-disabled/>

Modified in 3.0.0 and 3.1.1 firmware releases.

Configure the pull mode using settings described in the command itself. This command lets you enable
pulling a project and pushing logs to a server.

The following parameters must be used:



<push-logs>

Enable or disable pushing the logs to a WebDAV server from the device. Possible value
are yes, no. If a value of 'yes' is used, then the

<logs>

parameters must be present. If

not present a default value of 'no' is used.



<pull-project>

Enable or disable pulling a hypermedia project from an HTTP of WebDAV server.
Possible value are yes, no. If a value of 'yes' is used, then the

parameter

must be present. If not present a default value of 'no' is used.



<rpc-concentrator> (

Added in 3.0.0 firmware release.)

Enable or disable the activation of an RPC concentrator. Possible value are yes, no. If
a value of 'yes' is used, then the

<rpc>

parameter must be present. If not present a

default value of 'no' is used.



Parameters for the project to be pulled by the device. It must include the following
inner parameters:



<project-source>

URI of the root of the project to be pull from the device. This URI can
either be a folder for WebDAV enabled server, or an XML file
describing the content of the project for regular HTTP servers.



<project-time>

(Modified in 3.1.1 firmware release)

Time of the day at which the project must be pull to the device. The
time is expressed as HH:MM. If not specified '00:30' is used.

Содержание HMP series











































Результаты поиска

Содержание HMP series

Отзывы:

Похожие инструкции для HMP series

Бренды по названию

Популярные бренды

SpinetiX HMP series, Техническая документация инструкция

Результаты поиска

Содержание HMP series

Отзывы:

Похожие инструкции для HMP series

Бренды по названию

Популярные бренды