SpinetiX HMP series, Техническая документация инструкция

Страница: 19 / 42

Configure the player to use 3G modem as network connection using advanced settings.
This command is composed of the following parameters:

<pin>
Pin of the SIM card. The PIN number, if required, is passed to the modem when it is
plugged or the HMP reboots. Note that an incorrect PIN will lock the modem, so check
it is typed correctly.

<init-string-1> ... <init-string-6>
The init strings are used to initialize the modem and enter the data communication
parameters.

< dial-number>

<username>
Optional username to connect to the service.

<password>
Optional password to connect to the service.

<auth-protocol>
Possible values are any, none, pap, chap.
To use a specific APN instead of the subscriber's default enter ' AT +CGDCONT= <cid> ,"IP"," <apn> " ' as
an init string, where <cid> is the context ID (usually 1) and <apn> is the desired APN, and enter
' *99**1* <cid> # ' as the dial string. Contact your telecommunications operator for this kind of details!
Note: this parameter will override settings done using
<ethernet-dhcp>, <ethernet-static>,
<modem-3g-simple>
or
<modem-3g-advanced>
.
For instance, to enable 3G modem using the advanced configuration mode, use:
<modem-3g-advanced>
<pin>1234</pin>
<init-string-1>AT Z</init-string-1>
<init-string-2>AT Q0 V1 E1 &amp;C1 &amp;D2 +CMEE=2</init-string-2>
<init-string-3>AT +CR=1</init-string-3>
<init-string-4>AT +CGDCONT=1,"IP",""</init-string-4>
<init-string-5></init-string-5>
<init-string-6></init-string-6>
<dial-number>*99**1*1#</dial-number>
<username></username>
<password></password>
<auth-protocol>pap</auth-protocol>
</modem-3g-advanced>
Name of the device to be used in network discovery protocols (Bonjour). This is the name shown in
Elementi when discovering the devices. The device name may contain only ASCII letters, digits and the