<snmp-all/>
Configure the name of the SNMP read only community.
For instance, to configure the SNMP read only community to the name “public”, use:
<snmp-rocommunity>public</snmp-rocommunity>
This section describes how to add and or remove credential information available to the device.
Remove all previous credentials on the device, including any
<credential>
instruction before it.
For instance, to remove all credential from the device, use:
<credential-reset/>
Add credential to the device. This is necessary if you want the device to access a password protected
server. The credential will be used by Pull Mode as well. The HMP can connect to a protected server
using basic or digest authorization method.
This command is composed of the following parameter:
<server>
URI of the server for which the credential should be used.
<password>
Password to be use to connect to this server.
<username>
Username to be used to connect to this server
<realm>
Optional realm for this username and password combination. This can be used to
differentiate different area on the same server.
For instance, to add credential to connect to the demo site of the spinetix.com server, use:
Содержание HMP series
Страница 1: ...www spinetix com ...
