RadioProcessor
Appendix VII: RadioProcessor Firmware
Designs
The chart below shows specifications for different RadioProcessor firmware designs. The RadioProcessor
firmware design can be read from the board using the
pb_read_firmware.exe
example (located in:
...\SpinCore\SpinAPI\examples\General). (Note: the firmware ID can also be physically read from the label
placed on the design EEPROM of each board).
Firmware ID
10-22
(PCI SP6 board)
Firmware ID
15-2
(PCI SP16 board)
Firmware ID
12-15
(USB SP7 board)
Firmware ID
12-18
(RF TX Disabled,
USB SP7 board)
# Frequency Registers
8
16
8
8
# Tx Phase Registers
4
16
4
4
# Cos Phase Registers
4
4
4
4
# Sin Phase Registers
4
4
4
4
# TTL Output
Flags/Bits/Channels
4
4
4
4
Spectral Width Range (at 75
MHz A/D Clock Frequency)
1.2 kHz to 9.38
MHz
(4.47 Hz to 9.38
MHz w/ FIR
Enabled)
72 Hz to 9.38
MHz
(0.28 Hz to 9.38
MHz w/ FIR
Enabled)
72 Hz to 9.38
MHz
(0.28 Hz to 9.38
MHz w/ FIR
Enabled)
72 Hz to 9.38
MHz
(0.28 Hz to 9.38
MHz w/ FIR
Enabled)
CYCLOPS Control
Yes
No
Yes
Yes
Table A7.1:
RadioProcessor Firmware Designs.
Note: Most parameters can be customized. Please contact SpinCore Technologies, Inc for pricing and
availability of custom designs.
2020-10-07
52
www.spincore.com
