RadioProcessor
Header JP302 (HW Trigger/Reset)
The unshrouded male header labeled JP302 contains the
Hardware Trigger
and
Hardware Reset
lines.
On RadioProcessorUSB boards equipped with firmware version 12-4, 12-5,12-7, or 12-15, this header also
offers a 10 MHz output that is derived from the master clock oscillator. This signal is ideal for synchronization
purposes and is present on pin 2 of the header.
Table 10:
Output Header JP302 signal list.
2020-10-07
30
Figure 18:
Output Header JP302
Pin number
Function
1
Ground
2
10 MHz out or N/C
3
Ground
4
N/C
5
Ground
6
N/C
7
Ground
8
Hardware Trigger
9
Ground
10
Hardware Reset
www.spincore.com
