18
M2i.60xx / M2i.60xx-exp Manual
Hardware information
Introduction
Order Information
The card is delivered with 256 MSample on-board memory and supports standard replay (single-shot, loop, single restart), FIFO replay
(streaming), Multiple Replay, Gated Replay and Sequence Mode. Operating system drivers for Windows/Linux 32 bit and 64 bit, examples
for C/C++, LabVIEW (Windows), MATLAB (Windows and Linux), LabWindows/CVI, .NET, Delphi, Visual Basic, Python and a Base license
of the oscilloscope software SBench 6 are included. Drivers for other 3rd party products like VEE or DASYLab may be available on request.
Adapter cables are not included. Please order separately!
.
(1) : Just one of the options can be installed on a card at a time.
(2) : Third party product with warranty differing from our export conditions. No volume rebate possible.
PCI Express (PCIe)
PCI Express
PCI/PCI-X
Standard mem
1 channel
2 channels
4 channels
PCI/PCI-X
M2i.6011-exp
M2i.6011
256 MSample
20 MS/s
20 MS/s
M2i.6012-exp
M2i.6012
256 MSample
20 MS/s
20 MS/s
20 MS/s
M2i.6021-exp
M2i.6021
256 MSample
60 MS/s
60 MS/s
M2i.6022-exp
M2i.6022
256 MSample
60 MS/s
60 MS/s
60 MS/s
M2i.6030-exp
M2i.6030
256 MSample
125 MS/s
M2i.6031-exp
M2i.6031
256 MSample
125 MS/s
125 MS/s
M2i.6033-exp
M2i.6033
256 MSample
125 MS/s
60 MS/s
M2i.6034-exp
M2i.6034
256 MSample
125 MS/s
125 MS/s
60 MS/s
Memory
Order no.
Option
M2i.xxxx-512MS
Memory upgrade to 512 MSample (1 GB) total memory
M2i.xxxx-1GS
Memory upgrade to 1 GSample (2 GB) total memory
Options
Order no.
Option
M2i.60xx-dig
Additional synchronous digital outputs (2 per analog channel) on extra bracket including flat ribbon
cable 1m to IDC connector: Cab-d40-idc-100
M2i.60xx-2DigM
2 additional synchronous digital outputs on SMB connectors on card’s bracket. Suitable for cards with
1 analog module only (M2i.6011, M2i.6021, M2i.6030, M2i.6033)
M2i.60xx-4DigM
4 additional synchronous digital outputs on SMB connectors on card’s bracket. Suitable for cards with
2 analog modules only. (M2i.6012, M2i.6022, M2i.6031, M2i.6034)
M2i.xxxx-SH5 (1)
Synchronization Star-Hub for up to 5 cards, only 1 slot width
M2i.xxxx-SH16 (1)
Synchronization Star-Hub for up to 16 cards
M2i.xxxx-SSHM (1)
System-Star-Hub Master for up to 15 cards in the system and up to 17 systems, PCI 32 Bit card,
sync cables and extra bracket for clock and trigger distribution included
M2i.xxxx-SSHMe (1)
System-Star-Hub Master for up to 15 cards in the system and up to 17 systems, PCI Express card,
sync cables and extra bracket for clock and trigger distribution included
M2i.xxxx-SSHS5 (1)
System-Star-Hub Slave for 5 cards in one system, one slot width all sync bracket included
M2i.xxxx-SSHS16 (1)
System-Star-Hub Slave for 16 cards in system, two slots width, all sync bracket included
M2i.60xx-AmpMod
M2i.6030 and M2i.6030-exp only: ±10 V output amplifier module mounted on card
MI.6xxx-1Amp
1 channel ±10 V output amplifier PCI 32 bit card including 15 cm SMB to SMB connection cable
MI.6xxx-2Amp
2 channel ±10 V output amplifier PCI 32 bit card including 15 cm SMB to SMB connection cables
MI.6xxx-4Amp
4 channel ±10 V output amplifier PCI 32 bit card including 15 cm SMB to SMB connection cables
M2i.6-exp-1Amp
1 channel ±10 V output amplifier PCIe x1 card including 15 cm SMB to SMB connection cable
M2i.6-exp-2Amp
2 channel ±10 V output amplifier PCIe x1 card including 15 cm SMB to SMB connection cables
M2i.6-exp-4Amp
4 channel ±10 V output amplifier PCIe x1 card including 15 cm SMB to SMB connection cables
M2i.xxxx-bxio
Option BaseXIO: 8 digital I/O lines usable as asynchronous I/O and additional external trigger lines,
additional bracket with 8 SMB connectors
M2i-upgrade
Upgrade for M2i.xxxx: later installation of option -dig, -2DigM, -4DigM, -SH5, -SH16 or -bxio
Cables
Order no.
for Connections
Length
to BNC male
to BNC female
to SMA male
to SMA female
to SMB female
Analog/Clock/Trigger
80 cm
Cab-3f-9m-80
Cab-3f-9f-80
Cab-3f-3mA-80
Cab-3f-3fA-80
Cab-3f-3f-80
Analog/Clock/Trigger
200 cm
Cab-3f-9m-200
Cab-3f-9f-200
Cab-3f-3mA-200
Cab-3f-3fA-200
Cab-3f-3f-200
Probes (short)
5 cm
Cab-3f-9f-5
to 2x20 pole IDC to 40 pole FX2
Digital signals (option)
100 cm
Cab-d40-idc-100 Cab-d40-d40-100
Software SBench6
Order no.
SBench6
Base version included in delivery. Supports standard mode for one card.
SBench6-Pro
Professional version for one card: FIFO mode, export/import, calculation functions
SBench6-Multi
Option multiple cards: Needs SBench6-Pro. Handles multiple synchronized cards in one system.
Volume Licenses
Please ask Spectrum for details.
