Spectracom GSG-5 series, Руководство пользователя с руководством по SCPI

Страница: 30 / 378

Note: Retain all original packaging for use in return shipments if necessary.
The following items are included with your shipment:
GSG-5x/6x GNSS Simulator
Ancillary kit, GSG-5x/6x, containing:
AC cord, 5-15P to C13, 18 AWG, 10 A, 125 V
Adapter, SMA female–N male, 50 Ω
Cable assembly, SMA–SMA, 5ft.
USB 2.0 cable, with type A/B connector, 6ft.
CD with user’s manual, Protocol reference document & configuration SW
Compliance and shipping documentation
Optional: additional software and license key(s)
2.2.1 Unit Identification
The type plate on the rear panel (see "Rear Panel" on page 29) of the unit includes the GSG
MODEL, PART No., and SERIAL No.
This information, as well as a list of installed options (if any), can also be found under the menu
item
Options > Show system information .
2.3 Mechanical Installation
2.3.1 General Installation Considerations
Orientation
GSG-Series units can be operated in any position, i.e. horizontal, vertical, or at any angle.
Cooling
The air flow through the side ventilation openings must not be obstructed.
Leave 5 cm (2") of space around the unit.
Bench-Top Setup
For bench-top use, a fold-down support is available for use underneath the GNSS Simulator.
This support can also be used as a handle to carry the instrument.
14
CHAPTER
2
•
User Manual GSG-5/6 Series Rev. 26
2.3 Mechanical Installation