Spectracom GSG-5 series, Руководство пользователя с руководством по SCPI

Страница: 104 / 378

In Signal Generator mode, advanced GSG units can support: GPS, GLONASS, Galileo,
BeiDou, SBAS. If equipped with the L2 and/or L5 options, GSG allows the selected satellite(s)
to transmit all signals enabled on that satellite.
Note: For more information on available GSG models and options, see "GSG
Series Model Variants and Options" on page 194 .
To configure the Signal Generator mode, navigate to Options > Signal Generator :
Figure 3-28:
Signal Generator configuration view (depends on licensing options installed)
The following
Signal Generator
options can be configured:
3.6.2.1 Signal type
The Signal type selection will open a new view, as shown below. Note that the view depends
on the licensing options installed on your unit.
Figure 3-29:
Signal types configuration view
Combining signals from different GNSS systems
If your GSG unit is licensed for multiple channel operation, in Signal Generator mode it is not
only possible to choose between multiple frequency bands and codes, but also to simulate sev
eral GNSS signals, e.g., both GPS and GLONASS, at the same time. This can be achieved by
enabling several GNSS systems from the
Configure signal types menu.
In Signal Generator mode, GSG offers the following Signal type configuration options:
88
CHAPTER
3
•
User Manual GSG-5/6 Series Rev. 26
3.6 "Options" Menu