Spectracom GSG-5 series, Руководство пользователя с руководством по SCPI

Страница: 264 / 378

acceleration decrease during the next D
J
seconds. After that the acceleration returns to zero so
that a constant velocity is maintained during the next D
V
seconds. The whole process is depic
ted in the illustration below. The process is repeated until the profile is stopped.
The initial conditions when the profile is started are as follows:
Start jerk J
0
= 0 m/s³
Start acceleration A
0
= 0 m/s²
Start velocity = current velocity
Start range = current range
When the profile is stopped, the simulator resets jerk and acceleration to zero, but continues to
simulate the velocity that was present at the moment when the profile was stopped.
Example
SEND:
SOURce:ONECHN:LOSD:SET 0.005, 0.1, 20, 20
248
CHAPTER
6
•
User Manual GSG-5/6 Series Rev. 26
6.3 Command Reference