Speck pumps badu jet imperial, Руководство по установке

Страница: 6 / 30

6
VGB Compliance - VIRGINIA GRAEME BAKER POOL AND SPA SAFETY ACT
The Virginia Graeme Baker Pool and Spa Safety Act raises certain new requirements on owners and operators of
swimming pools and spas.
Pools or spas constructed on or after December 19, 2008, shall utilize:
Pools and spas constructed prior to December 19, 2008, with a single submerged suction outlet shall use a
suction outlet cover that meets ANSI/APSP 16-2011 and either:
For more information about the Virginia Graeme Baker Pool and Spa Safety Act, contact the Consumer Product
Safety Commission at (301) 504-7908 or visit www.cpsc.gov.
General Safety Instructions - continued
Pool pump must be installed by a licensed or certified electrician or a qualified pool
serviceman in accordance with the National Electrical Code and all applicable local codes
and ordinances. Improper installation will create an electric hazard which could result in
death or serious injury to pool users, installers, or others due to electrical shock, and may
also cause damage to property.
Always disconnect power to the pool pump at the circuit breaker before servicing
the pump. Failure to do so could result in death or serious injury to serviceman, pool
users, or others due to electric shock.
No submerged suction outlets, a gravity drainage system with ANSI/APSP compliant cover(s), one or more
unblockable outlets; or
A multiple main drain system without isolation capability with suction outlet covers that meet ANSI/APSP
16-2011 Suction Fittings for Use in Swimming Pools, Wading Pools, Spas, and Hot Tubs and either: (A)
(B)
A safety vacuum release system (SVRS) meeting ASME/ANSI A112.19.17 Manufactured
Safety Vacuum Release Systems (SVRS) for Residential and Commercial Swimming Pool, Spa,
Hot Tub, and Wading Pool Suction Systems and/or ASTM F2387 Standard Specification for
Manufactured Safety Vacuum Release Systems (SVRS) for Swimming Pools, Spas and Hot Tubs
or
A properly designed and tested suction-limiting vent system or
An automatic pump shut-off system.
(i)
(ii)
(iii)
A multiple main drain system without isolation capability, or a single (VGB 2008 compliant) unblockable
suction outlet, or
A safety vacuum release system (SVRS) meeting ASME/ANSI A112.19.17 and/or ASTM F2387, or
A properly designed and tested suction-limiting vent system, or
An automatic pump shut-off system, or
Disabled submerged outlets, or
Suction outlets shall be reconfigured into return inlets. (A)
(B)
(C)
(D)
(E)
(F)
WARNING:
Risk of Electrical Shock or Electrocution
2
General Description
The BaduJet Imperial from Speck Pumps has been designed to be installed during the construction of your pool to create a
water treadmill for anyone wanting a therapeutic and effective exercise. The BaduJet Imperial can be installed in any type
of pool, large or small, from gunite to vinyl liner. The self-contained, flush-mounted unit is a jet-propulsion system that
pumps water into the pool creating a current in excess of 5,700 gallons per minute from a recessed jet housing. Topping off
the experience is the pulsating massage hose which can be attached to the jet nozzles for easy and convenient massage
treatments for joints and muscles.