Speck pumpen BADU BADUJET Turbo Pro, Перевод оригинального руководства по эксплуатации

Страница: 28 / 50

Installation
28 EN 08|2020
5.3.2 Installing the nozzle unit
1. Insert the nozzle unit (4) with its 3 fastening domes into the
cylindrical depression of the housing centring/flange centring.
2. Tighten the three tapping screws (6x40 (46)) with a torque of
6 Nm.
Fig. 13
NOTICE
Appropriate adapters (45) must be installed between the housing
and the nozzle unit (4) for a pool wall thickness from 3.5 mm up to
max. 27 mm.
The adapter height must be chosen so that the round panel (52)
has no gap bigger than 8 mm from the maximally swivelled ball
nozzle (42) in the installed state.
The following order kits must be used above a wall thickness of
7 mm:
Wall thickness
(mm)
Adapter type
Screw length
(mm)
Order kit
0 to 3.5 - 40 -
above 3.5 to 7 Washer 3.5 40 -
above 7 to 11.5 Washer 7 50 1
above 11.5 to 14 C 50 1
above 14 to 17.5 D 50 1
above 17.5 to 21 E 60 2
above 21 to 24 F 60 2
above 24 to 27 G 60 2