Speck pumpen BADU BADUJET Turbo Pro, Перевод оригинального руководства по эксплуатации

Страница: 18 / 50

Installation
18 EN 08|2020
5.1.8 Frequency converter installation instructions
NOTICE
The frequency converter should only be installed by a qualified
electrician.
 See the enclosed original operating instructions for full
information about the frequency converter.
 The converter may only be installed vertically.

It must be installed on a suitable level and flame-retardant
surface.
 Never store inflammable materials in the vicinity of the
converter.
 The installation site should be vibration-free.
 Never install the converter in areas with excessive moisture,
aggressive chemicals or potentially dangerous dust particles
in the air.
 Do not install the converter in the vicinity of heat sources with
high radiation.
 Protect against direct sunlight. Install sun protection if
necessary.
 The installation site must be free from risk of frost.
 The air flow through the converter may not be obstructed.
The heat from the converter must dissipate naturally.
 A suitable pressure compensation valve must be installed in
the feed-through plate in case of heavy fluctuations in the
ambient pressure and temperature.
NOTICE
If the converter has been in storage for longer than 2 years, the
intermediate circuit capacitors must be freshly reformed before it
is put back into operation. See the manufacturer’s documentation
for this.