Speck pumpen BADU BADUJET Turbo Pro, Перевод оригинального руководства по эксплуатации

Страница: 11 / 50

Safety
08|2020 EN 11

Check and clean the suction openings regularly.
2.7.6 Body traps
If openings between 25 mm and 110 mm are unavoidable for
constructional reasons, this is only permissible when the installer
warns the customer of the potential risk.

The owner of the system must alert users to the potential risk
of body traps.
2.7.7 Magnetic forces
Risk of injury from magnetic forces when assembling/dismantling
the motor unit and drive unit.
 Pay attention to magnetic forces when working on the unit.
2.7.8 Magnetic Field

Avoid contact between magnets and all devices and objects
which could be damaged or obliterated due to strong
magnetic fields.
2.7.9 Risk of injury at the inflow nozzle
The inflow nozzle operates with a high volume flow rate. This can
cause injuries to the eyes or other sensitive parts of the body.
 Avoid direct contact of these parts of the body with the water
jet from the inflow nozzle.
2.7.10 Danger of drowning
Danger of drowning due to strong current for persons of limited
swimming ability and physical strength.
 Adapt the system power to the swimmer.
 Children and persons with physical and mental disabilities
must be supervised.
2.8 Faults
 In case of a fault, immediately switch the pump off and
remove it from operation.
 Have all faults repaired immediately.
2.8.1 Seized drive unit
Switching on a seized drive unit several times in succession can
damage the motor. Observe the following points:
 Do not switch the unit on repeatedly.
 Turn the propeller by hand.
 Clean the drive unit.