Spearhead AGRICUT
240 Offset
21
Remove the parking leg pin and raise the leg
clear of the ground
– replace pin and secure
with lock pin.
Connect the end of the PTO shaft that has
the shear bolt to the machine. Secure the
PTO guard retaining chain to a suitable
location on the machine.
Connect the end of the PTO shaft that has
the shear bolt to the machine. Secure the
PTO guard retaining chain to a suitable
location on the machine.
NOTE: On initial installation the PTO shaft
length may need adjusting to suit; refer to
PTO driveshaft installation page for details
of this procedure.
Connect the hydraulic hose fittings to the
tractor spool valve.
Unpack the Transport Latch Pull Cord and route it
into the tractor cab through the rear window
– it
should be located in a position that is within easy
reach of the operator from the tractor seat.
Ensure the routing of the cord is such that it
allows sufficient slack to avoid accidental or
unintentional operation, and that it remains
clear of all moving components on both the
tractor and the machine at all times.
