Spearhead AGRICUT
240 Offset
18
Unpacking the Machine
Only use approved lifting equipment which is correctly fastened
to the machine
– this will increase your personal safety. Failure
to follow the safety instructions could result in accidents and
serious injuries.
Handling the Machine
The machine should be lifted using suitable overhead lifting gear specifically designed
for handling loads of this nature. Ensure lifting equipment has a SWL of 1.5 tonnes
minimum. The machine must be only lifted using all four approved lifting points, the
locations of which are indicated in the illustration
above.
Ensure the machine is evenly balanced before
attempting to raise the machine and keep all
bystanders at a safe distance from the raised load.
Remove the PTO shaft from its storage position and
place it safely away from the machine.
Remove stacking/transport legs (if fitted) and with
the machine fully supported, inspect the underside
of the machine to ensure it is undamaged, and
check all blades rotate freely and do not foul on the
body.
Before attempting to access the underside of the machine,
ensure it is adequately and safely supported. Do not rely on the
tractor’s hydraulics. Use safety supports that have a minimum
Safe Working Load (SWL) of 1.5 tonnes.
Remove stacking/transport legs (if
fitted