Spearhead AGRICUT
240 Offset
36
Oil Level
Check the gearboxes oil levels at the intervals stated in the maintenance schedule;
ensure the machine is lowered to the ground and located on a firm level site to
perform this task.
Checking the oil level in the gearboxes is by removal of the Oil Level Plug, indicated
‘2’ in the photos below, the level is correct when the oil is up to the bottom of the level
plug orifice. If the gearbox requires ‘topping up’ add oil via the filler plug indicated ‘1’ in
the photos until it starts to seep from the level plug orifice; replace both plugs securely
to complete the task.
NOTE: The primary gearbox can be drained of oil with the gearbox in situ; it does not
require removal from the frame.
Gearbox oil levels must be checked on a fortnightly basis during the season and the
oil completely drained and replaced annually.
Centre Gearbox Plug Locations
1) Oil Filler Plug 2) Oil Level Plug
Outer Gearbox Plug Locations (RH shown)
1) Oil Filler Plug 2) Oil Level Plug
Primary Gearbox Plug Locations (240 Offset
Models only)
1) Oil Filler Plug 2) Oil Level Plug
Primary Gearbox Drain Plug (240 Offset Model
only)
