Spearhead AGRICUT
240 Offset
19
Tractor Preparation
Ensure that all operators have read and thoroughly understood
all the safety procedures. For further information refer to the
relevant sections of this manual.
When connecting the machine to a tractor there is a risk of
personal injury. Failure to follow the safety instructions could
result in serious injuries to either yourself or others. Therefore,
when connecting the machine and the tractor you should:
Make sure the tractor cannot roll.
Make sure that the tractor and the machine have compatible category
attachments.
Use the hydraulic three point linkage slowly and carefully.
When carrying out an attachment you must make sure that the machine is
placed on a firm and level surface.
Remove tractor drawbar or position it to one side so it does no foul on the PTO shaft
