Sovan's CTD10R-E, Руководство по эксплуатации

Страница: 22 / 45

17
No. Check point Check content
Whole truck
1 Whole status Abnormal or not.
2 Horn Sound
Steering
system,
braking
system,
hydraulic
system and
lifting
system
3 Operation handle
When the operation handle is turned, with the
handle switching between area A and B, there is
a noise from the brake.
4 Brake clearance
The clearance between brakes should be kept
between 0.2mm and 0.8mm.
5 Operation handle Degree of tightness and rotary flexibility.
6
Truck frame and
fastener
Function
，
and check cracks, lubrication and
tightness of fasteners.
7
Connecting rod and
wheel carrier Function and check the cracks, bending,
deformation and lubrication condition.
8 Oil pipe Whether oil pipes leak or not.
9 Hydraulic oil Proper quantity of oil.
10 Lifting oil cylinder Whether there is any oil leakage or not.
Storage
battery,
charger and
electric
system
11 Electrolyte
Liquid level
，
specific gravity and cleanness
12 Plug Function, whether it is damaged or not
13 Key switch Function
14 Contactor Contact performance and function
15 Inching switch Function
16 Controller Function
17 Driving motor
Wearing status of carbon brush and selenium
rectifier.
18 Lifting motor
Wearing status of carbon brush and selenium
rectifier.
19 Steering motor
Wearing status of carbon brush and selenium
rectifier.
20 Fuse Whether it is perfect or not
21
Wiring harness and
connection terminals
Whether flexible and whether damaged or not.
adjustment of the brake clearance
1 Hollow screw 2 Fitting screw
3 Spring 4 Armature 5 Motor shaft
6 Spline housing 7 Friction plate
8 Electromagnetic coil 9 Mounting cover plate
10 Mounting screw
1. The structure of brake is shown as the figure. After a