PAGE 1 OF 3
0521 IH-1387
H-1387
APPLIANCE HAND TRUCK –
4-WHEEL
1-800-295-5510
uline.com
π
SAFETY
OPERATION
WARNING! Check truck and all hardware for
wear and tightness before use.
• Do not use if nylon belt is worn or cut.
• If climber belt is worn, immediately remove unit
from service and repair before use.
• Do not allow belt to twist when securing load.
• Firmly tighten belt around load before moving.
• Approach stairs or inclines with caution.
• Use only with assistance when going up or down
stairs or inclines.
• Use extreme caution when moving on uneven
floors.
1. Release the ratchet tightener and wrap the belt
around the load. Be sure to return the ratchet
tightener to the locked position once the belt is
clasped. (See Figure 1)
2. Use ratchet handle to tighten the belt and secure
the load. (See Figure 1)
3. Press the foot release to release fold-out rear wheels
from locked position. (See Figure 2)
4. Use the lower handle to transition the truck back to
the 2-wheel position. (See Figure 3)
Figure 2
Foot Release
Figure 3
Lower Handle
Figure 1
Ratchet Tightener
in Locked Position
Ratchet
Handle
Lock
Release
Belt
Para Español, vea página 2.
Pour le français, consulter la page 3.
