Op
erat
io
n
Output Services
32
3
If necessary, load pictures from a different storage
media of the same type as the one you are using.
If you choose not to do so or you are writing
scanned pictures to CD-R, proceed to step 4.
Note
You can only load pictures data from another media
of the same type as the one you are using. In other
words, if you loaded pictures from a “Memory
Stick”, you can only insert a different “Memory
Stick” containing pictures at this point.
1
Touch the [More Media] button.
2
Read the message and touch the [OK] button.
The pictures selected in step 2 above are
loaded.
3
When you are prompted to, remove the media.
You are prompted to insert a different storage
media.
4
Follow the instructions outlined from step 2 of
“Selecting the Media Containing Pictures and
Inserting It into the Unit” (page 5) to step 1 of
“Selecting the Pictures and Specifying the
Number of Copies to Print” (page 6).
5
Depending on the number of times that you
want to change media, repeat steps
1
to
4
as
many times as necessary.
Note
The amount of image data you can load is
determined by the [CD-R Media Type] setting in
the [Custom] tab on the Administration screen.
4
Touch the [OK] button.
The screen allowing you to verify your order
appears.
Note
If you configured the unit to automatically print an
index when writing pictures to a CD-R in the
Administration screen, a message prompting you to
verify whether to print additional index pages
appears (because charges apply when the index has
more than one page).
• Touch the [Yes] button to proceed with the output
of the index at the price indicated in the message.
• Touch the [No] button to proceed with the output
of the first page of the index at no charge.
5
Verify your order, and then touch [Check Out].
The password entry screen appears.
6
Touch the appropriate keys to enter the password.
If you need to cancel password entry and start
again, touch the [Clear] button.
