EC-82 board. One channel is connected to the application processor EMMA (IC4200) through the USB switch IC
(IC4500), and the other two channels are reserved for the system.
SATA host controller (IC3703)
The SATA host controller is connected to the SSD (IC3704) with the SATA signal. The SSD (IC3704) stores memory
image data for high-speed startup. The initial operation program of the media processor DIABLO (IC2900) develops
memory image data through the SATA host controller (IC3703) to the DDR2 memory (IC3001, IC3003).
USB3.0 host controller (IC3602)
The USB3.0 host controller provided with a 2-channel USB3.0 port is controlled by the media processor DIABLO
(IC2900) through the PCI Express bus. One channel out of two channels is connected to the USB3.0 connector on the
LED-529 board, and the other channel is not used.
HPR-53 Board
The HPR-53 board mainly consists of an FPGA ETCx (IC100) that has high-speed differential IF and PCIe IF and an
SStP video codec. This board also supports external input video signals and mainly handles the following signals.
• Video data input/output (5 Gbps high-speed differential signals)
• PCI Express
• SDI input
The Video data sent from the video signal processor ROSETTA (IC0100/DPR-362 board) during recording is input to
the FPGA ETCx (IC100) by the 4-lane 5 Gbps high-speed differential signal. The stream data compressed in the SStP
codec Curie (IC1000) in connection with the ETCx is output to the media processor DIABLO (IC2900/DPR-362 board)
through the PCI Express bus.
This board operates reversely in the playback process.
External serial SDI input signal is transferred to the connector (J500) and the equalizer (IC501), and is then converted
to parallel signals in the ETCx (IC100). Then the parallel signals are divided into audio data and synchronization signal.
The audio data is output to the FPGA AUDX (IC801/AU-360 board) and the synchronization signal is output to the
FPGA GMON (IC2301/DPR-362 board). The video data is converted to 5 Gbps high-speed differential signal-format
data, and the converted data is output to the video signal processor ROSETTA (IC0100/DPR-362 board).
EC-82 Board (SxS Memory Card Slot)
The 2-channel PCIExpress signal from the media processor DIABLO (IC2900/DPR-362 board) and the 2-channel USB
host signal from the USB2.0 host controller (IC3300/DPR-362 board) are connected to the EC-82 board (provided with
two memory card slots) through the fine-wire coaxial connector (CN100). The ExpressCard power controller (IC100,
IC201) on the EC-82 board is controlled by the GPIO in the media processor DIABLO (IC2900/DPR-362 board). The
DC/DC converter (IC101) generates a voltage of 1.5 V for the SxS memory card from 3.3 V.
LED-529 Board (USB Connector for PC)
The USB device signals that are input to and output from the USB function controller in the media processor DIABLO
(IC2900/DPR-362 board) are connected to the connector (CN001) on the LED-529 board from the connector (CN5202)
on the DPR-362 board with the fine-wire coaxial harness, and are then connected to the USB2.0 connector (B) (CN003).
The USB host signals that are input to and output from the USB3.0 host controller (IC3602/DPR-362 board) are
connected to the connector (CN001) on the LED-529 board from the connector (CN5202) on the DPR-362 board with
the fine-wire coaxial harness, and are then connected to the USB3.0 connector (A) (CN002).
PXW-X500
1-5
Содержание PXW-X500
