190
1) “(B)” is displayed for cards in slot B.
The following caution and operation messages may appear in the center of the screen. Follow the
instructions provided to resolve the issue.
1) “(B)” is displayed for cards in slot B.
Media(A)
1)
Clips Full Continuous
On
High-speed
flashing
When using the simultaneous recording
function
Media(A)
1)
Near Full Intermittent
Flashing
Flashing
When using the simultaneous recording
function
Media(A)
1)
Last Clip
Rec
Intermittent
Flashing
Flashing
When using the simultaneous recording
function
Caution and Operation Confirmation Display
Display indication
Cause and Solution
Battery Error
Please Change Battery
An error was detected in the battery pack.
Replace with a normal battery pack.
Backup Battery End
Please Change
The remaining capacity of the backup battery is insufficient.
Replace the backup battery.
Unknown Media(A)
1)
Please Change
A memory card that has been partitioned or a memory card containing
more clips that can be handled by the camcorder was inserted.
The card cannot be used in the camcorder, and must be replaced.
Media Error
Media(A)
1)
Needs to be Restored
An error occurred on the memory card, and the card must be restored.
Eject and then re-insert the card, then repair the card.
Media Error
Cannot Record to Media(A)
1)
The memory card may be damaged, and can no longer be used for
recording.
Playback may be possible, so making a copy and replacing the
memory card is recommended.
Media Error
Cannot Use Media(A)
1)
The memory card may be damaged, and can no longer be used for
recording or playback.
The card cannot be used in the camcorder, and must be replaced.
Will Switch Slots Soon
The camcorder will switch memory card slots shortly.
Check that there is a memory card in both slots.
Cannot Use Media(A)
1)
Unsupported File System
A card using a different file system or an unformatted card was
inserted.
The card cannot be used in the camcorder, and must be replaced or
formatted using the camcorder.
Media(A)
1)
Error
Playback Halted
Cannot continue playback because an error occurred while reading
from the memory card.
If the problem persists, make a copy and replace the memory card.
Media(A)
1)
Error
Recording is stopped because an error occurred on the memory card.
If the problem persists, replace the memory card.
Different Media is Inserted
Cannot Use Media(A)
1)
Different media was inserted. Eject the inserted card, and insert a card
of the same type as the previously inserted card.
Warning message
Warning
sound
WARNING
indicator
Tally/REC
indicator
Cause and Solution
