19
Thumbnail screen operations section and audio
control section
a
Thumbnail indicator
This lights when the thumbnail screen is
displayed.
b
THUMBNAIL button
Press this button to display the thumbnail screen
and to carry out a thumbnail
operation.
Press once more to return to the original display.
c
SET button and arrow buttons
Use these buttons to make timecode and user bit
settings, and for thumbnail screen operations
.
When the menu is displayed, press this button to
select an item or to confirm the setting change.
d
MENU button
Each press of this button turns the setup menu
display on and off.
The function of this button is the same as that of
the MENU ON/OFF switch.
e
F-RUN/SET/R-RUN (free run/set/
recording run) switch
Selects the operating mode of the internal
timecode generator. The operating mode is set as
explained below, depending on the position of the
switch.
F-RUN:
Timecode keeps advancing, regardless
of whether the camcorder is recording. Use
this setting when synchronizing the timecode
with external timecode.
SET:
Sets the timecode or user bits.
R-RUN:
Timecode advances only during
recording. Use this setting to have a
consecutive timecode on the recording
media.
For details, see “Setting the Timecode” (page 59).
For details, see “Setting the User Bits” (page 60).
f
LEVEL CH1/CH2/CH3/CH4 (audio
channel 1/2/3/4 recording level) knobs
Adjust the audio levels to be recorded on channels
1, 2, 3, and 4 when the AUDIO SELECT CH1/
CH2 and AUDIO SELECT CH 3-4 switches are
set to MANUAL.
g
AUDIO SELECT CH 3-4 (audio
channel 3/4 adjustment method
selection) switches
Select the audio level adjustment method for
audio channels 3 and 4.
AUTO:
Automatic adjustment
MANUAL:
Manual adjustment
h
ESSENCE MARK button
By pressing this button when a thumbnail display
is on the screen, you can view the following
thumbnail displays of the essence-marked frames
of the selected clip, depending on the item
selected in a list displayed on the screen.
All:
Thumbnail display of all frames marked with
essence marks.
Rec Start:
Thumbnail display of frames marked
with Rec Start marks and of the first frames
of clips (when the first frames are not marked
with Rec Start marks).
Shot Mark1:
Thumbnail display of the frames
marked with Shot Mark 1.
Shot Mark2:
Thumbnail display of the frames
marked with Shot Mark 2.
You can also select Shot Mark 0 and Shot Mark 3
to Shot Mark 9.
If a clip is recorded using planning metadata that
defines names for shot mark 0 to shot mark 9, the
selection options in the list are displayed by the
defined names.
setting
LCD monitor backlight
H
High (select this to view the LCD
monitor outdoors in the daytime)
M
Brightness between H and L
L
Low (select this to view the LCD
monitor indoors or outdoors at night)
OFF
Off (the display is also off)
