Sony PCM-3348HR, Руководство по эксплуатации

Страница: 195 / 256

Chapter 11 System Configuration
11-23
Chapter 11
Switch settings
PCM-3348HR settings
Switch Master unit Slave unit
REC MODE INSERT INSERT
SYNC CLOCK VIDEO Set automatically
Fs Set automatically Set the same as
the master unit
REFERENCE When terminated: ON
VIDEO INPUT For loop-through —
75
Ω
output: OFF
TIME CODE EXT
—
selection
TIME CODE GEN Format being used
—
format selection
RM-3348HR settings
Switch Master unit Slave unit
SELECTOR ON (MASTER) OFF (SLAVE)
switch No.2 (lower)
SELECTOR switch No.4: OFF No.4: OFF
No.4 to 8 (lower) No.5: OFF No.5: OFF
No.6: OFF No.6: OFF
No.7: OFF No.7: OFF
No.8: OFF No.8: ON
Device address: Device address:
00H 01H
SLAVE button OFF ON
Timer display mode CTL ABSOLUTE CTL ABSOLUTE
or CTL RELATIVE or CTL RELATIVE
Notes on operation
• The master PCM-3348HR, the video equipment, and
the time code synchronizer are all synchronized to a
composite video signal.
• The slave PCM-3348HR is synchronized to the
master unit by the word sync signal. The two PCM-
3348HR units must therefore have the same sampling
frequency.
• Use cables with BNC connectors to connect the word
sync, sector sync and sector address signals.
• By setting the VARI SYNC switch on the MC board
of the master PCM-3348HR unit to ON, you can use
the variable speed playback function to control the
tape transport on both the master
and slave units.
• Use a prestriped tape and carry out insert recording.
• The tape on the slave unit must be prestriped with the
same sampling frequency as the master unit.