Sony PCM-3348HR, Руководство по эксплуатации

Страница: 156 / 256

9-8
Chapter 9 Editing
Chapter 9
Automatic calculation of rehearsal IN and
OUT point values
Rehearsal IN and OUT points
When rehearsing individual editing points, rehearsal
IN and OUT point values on the player only are
automatically calculated as shown in the diagram.
However, execution of rehearsing does not actually
change any editing points.
During editing, you can rehearse the vicinity of the
recorder or player editing IN point.
Rehearsing on the recorder
Use the following procedure to rehearse on the
recorder.
1
Press and extinguish the SLAVE button on the
player RM-3348HR.
2
Press the player STOP button to stop the tape
transport.
3
Press the recorder AUTO PUNCH button.
This carries out a rehearsal of the vicinity of the
recorder editing IN point.
Rehearsing on the player
Use the following procedure to rehearse on the player.
1
Press and extinguish the SLAVE button on the
player RM-3348HR.
2
Set the player preroll time to at least 2 seconds.
For details on setting the preroll time see “4-8 Setting
the Preroll Time” (page 4-28).
3
Press the player AUTO PUNCH button.
This automatically puts all channels of the player
in the recording ready state, and carries out a
rehearsal of the vicinity of the player
editing IN
point.
To prevent inadvertent recording, at this point the
player REC button is disabled.
9-6 Rehearsing Individual Editing Points
Recorder
(master unit)
Rehearsal
IN point
Postroll time
Rehearsal
OUT point
Postroll time
Cross fade time
Preroll time
Rehearsal
IN point
Player
(slave unit)
Preroll time
1 second
Rehearsal
OUT point